Mi persona de contacto
igus® México S. de R.L. de C.V.

Boulevard Aeropuerto 160

Col. Corredor Industrial Toluca-Lerma

Toluca, C.P 52004

+52 728 2843185
+52 728 2843185

iglidur® J350-PF, filament for 3D printing

  • High wear resistance
  • Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) 
  • Lubrication-free and maintenance-free
  • Higher temperature resistance up to 180°C (continuous) 
  • High-temperature 3D printer required
Descripción de producto
iglidur J350-PF is the first high-temperature tribo-filament from igus. It is characterised by a high long-term temperature resistance of 180°C as well as a very low coefficient of friction and wear. It is also flame-retardant according to UL94-V0 Due to its high processing temperature of 350-360°C as well as a mandatory build chamber temperature of min. 160°C, a high-temperature 3D printer is required for processing. The processing is sophisticated. It is also available as injection moulding and bar stock material.
 
When to use it?
  • For very high tribological requirements
  • At very high application temperatures of up to 180°C
  • From prototype to series: the same material for 3D printing, bar stock and injection moulding
When not to use it?
  • If, in addition to high application temperatures, high strength is also required or complex parts are to be produced (→ iglidur RW370-PF)
  • If your existing 3D printer does not have a build chamber heater (→ iglidur I180-PF)
Datos técnicos
Descargas

Otras soluciones

Consulting

Estaré encantado de responder a sus preguntas personalmente

Consulta y envíos

En persona:

De lunes a viernes de 7:00 a 20:00
Sábados de 8:00 a 12:00

Online:

24h