Elija el lugar de entrega

La selección de la página del país/región puede influir en varios factores como el precio, las opciones de envío y la disponibilidad del producto.
Mi persona de contacto
igus® México S. de R.L. de C.V.

Boulevard Aeropuerto 160

Col. Corredor Industrial Toluca-Lerma

Toluca, C.P 52004

+52 728 2843185
+52 728 2843185
MX(ES)

Gears & Racks online shop

In our gear shop you have the possibility to buy different plastic gears.
The gears made of tribologically optimised iglidur® high-performance polymers impress with their significantly higher service life than gears made of comparable plastics.
Due to fine-tuned additives of reinforcement materials and solid lubricants, they do not require additional lubrication.
Do you have questions about our gears or would you like technical support? We will be happy to advise you without obligation. Contact us here.

Categoría
Filtro
Tamaño

Número de productos: 19

Nuevo

iguform S270 engranajes, mm

  • Bajo coeficiente de fricción
  • Baja absorción de humedad
  • Bajo nivel de ruido

8 módulos diferentes disponibles. Elija entre más de 300 dimensiones.

Cremalleras compatibles disponibles aquí

Para obtener información sobre las tolerancias, consulte la descripción del producto.
desde / de 1.96 USD/Uni.
318 artículos, de los cuales están listos para enviar:
314 en 2 -6 días laborables
Ir a la página de producto
Nuevo

iguform S270 cremalleras para piñones, mm

  • Bajo coeficiente de fricción
  • Baja absorción de humedad
  • Bajo nivel de ruido

Módulos a juego disponibles para la gama de productos de engranajes.

Encontrará información sobre la longitud en la descripción del producto.
desde / de 5.20 USD/Uni.
Ir a la página de producto
Nuevo

igutek P360 engranajes, mm

  • Mayor resistencia al desgaste
  • Buenas propiedades tribológicas
  • Gran robustez
  • Resistencia a los impactos

8 módulos diferentes disponibles. Elija entre más de 300 dimensiones.

Cremalleras compatibles disponibles aquí

Para obtener información sobre las tolerancias, consulte la descripción del producto.
desde / de 2.26 USD/Uni.
317 artículos, de los cuales están listos para enviar:
313 en 2 -6 días laborables
Ir a la página de producto
Nuevo

igutek P360 cremalleras para piñones, mm

  • Mayor resistencia al desgaste
  • Buenas propiedades tribológicas
  • Gran robustez
  • Resistencia a los impactos

Módulos a juego disponibles para la gama de productos de engranajes.

Encontrará información sobre la longitud en la descripción del producto.
desde / de 6.72 USD/Uni.
Ir a la página de producto

xirodur® B180, engranaje, mm

  • ​​​​​​Coeficientes de fricción muy bajos
  • Material resistente al desgaste para un funcionamiento continuo
  • Amortiguación de las vibraciones
  • Disponible en 3 diseños de cubo

Cremalleras compatibles disponibles aquí
desde / de 9.75 USD/Uni.
9 artículos, de los cuales están listos para enviar:
9 en 2 -6 días laborables
Ir a la página de producto

iguform S270 bevel gears - ratio 1:1

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 2.26 USD/Uni.
Ir a la página de producto

iglidur® F, gear, mm

  • Electrically conductive 
  • High compressive strength
  • Good temperature resistance
  • Available in 3 hub designs

iglidur® A500 engranaje, mm

  • El corredor de fondo resistente a altas temperaturas para la industria alimentaria
  • Conforme con el Reglamento (UE) n.º 10/2011
  • Conformidad con la FDA
  • Resistencia a temperaturas comprendidas entre -100 °C y +250 °C

igutek P360 bevel gears - ratio 1:1

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 2.47 USD/Uni.
Ir a la página de producto

iguform S270 bevel gears - ratio 1:1,5

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1.5) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 7.54 USD/Uni.
Ir a la página de producto

iguform S270 bevel gears - ratio 1:2

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 5.31 USD/Uni.
Ir a la página de producto

iguform S270 bevel gears - ratio 1:3

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet


Please note: In order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:3) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 4.19 USD/Uni.
Ir a la página de producto

iguform S270 bevel gears - ratio 1:4

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:4) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 3.48 USD/Uni.
Ir a la página de producto

iguform S270 bevel gears - ratio 1:5

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:5) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 3.70 USD/Uni.
Ir a la página de producto

igutek P360 bevel gears - ratio 1:2

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
desde / de 6.32 USD/Uni.
Ir a la página de producto

Consulting

Photo
Francisco Márquez

Contacto en México

Write e-mail

Consulta y envíos

En persona:

De lunes a viernes de 7:00 a 20:00
Sábados de 8:00 a 12:00

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.