Name: drylin W miniature linear carriage WW | Made of stainless steel (WW-06-20-T415-ES2-A160)
Brand: Drylin
SKU: WW-06-20-T415-ES2-A160
Availability: InStock

Tecnología lineal

W guías de perfil

Carruajes

drylin W miniature linear carriage WW | Made of stainless steel

Miguel Nivon

Request our white paper “When should I use plastic linear plain bearings and when should I use linear guideways with recirculating ball bearings?”

¿Tiene preguntas? ¡Estamos aquí para ayudar!

Ayuda con la selección del accionamiento por tornillo de plomo ideal para su aplicación, cálculo de la vida útil para la configuración de accionamiento por tornillo de plomo deseada, descarga de PDF con todos los detalles sobre la aplicación requerida.&nbsp;

Buscador de productos iglidur® para el cojinete liso derecho&nbsp;

Ingresar los parámetros de recorrido, radio de curvatura y aceleración le proporcionará la vida útil del cable chainflex®.

Selección de producto y cálculo de vida útil. Al introducir los parámetros de aplicación, obtiene la vida útil esperada para los cojinetes lidur® lidur®.

<h3 style="text-align:start;">¿Necesita un mecanizado de tornillo de plomo personalizado?</h3>
Configure rápidamente & fácilmente en línea aquí.

El motor drylin E correcto en unos pocos clics. Simplemente ingrese sus requisitos y reciba sugerencias adecuadas.

Varios tipos y longitudes de cable disponibles como stock residual en condiciones atractivas.

¿No pudo encontrar el eje correcto? Luego, ¡simplemente configure su eje de la manera que desea que sea!

Utilice la calculadora de vida útil para determinar la vida útil esperada de una cadena de energía.

¿Busca una cadena portacables con cables lista para instalar o no está seguro de si la cadena que ha seleccionado es adecuada para su aplicación? El sistema experto para cadenas portacables le ayudará a encontrar la adecuada y realizar los cálculos pertinentes.

Encuentre fácilmente la solución perfecta para sus aplicaciones: ingrese sus requerimientos y reciba la configuración adecuada.&nbsp;&nbsp;

¿Falta algo? Luego, simplemente configure su solución deseada usted mismo. ¡Utilice nuestro configurador!

Encuentre rápidamente el rodillo transportador perfecto para su aplicación: simplemente ingrese sus requisitos y reciba rodillos transportadores adecuados con un cálculo de la deflexión esperada&nbsp;.

En tres pasos, el experto igubal® le pregunta sobre sus requerimientos para cojinetes igubal® autoalineables y le proporciona un análisis integral de idoneidad y vida útil de todos los productos igubal®.Puede comparar los resultados y pedir el rodamiento igubal® más adecuado directamente a través de la tienda en línea igus®. &nbsp;

Encuentre rápidamente el rodamiento de bolas perfecto para su aplicación: simplemente ingrese sus requisitos y reciba los rodamientos de bolas adecuados con una declaración de vida útil.&nbsp;

El buscador de productos le proporciona rápidamente una visión general de todos los cables chainflex® posibles específicamente para sus aplicaciones.

Calcula aquí el recargo de cobre actual para tu cálculo de precio.

The Quickrobot is the easiest and fasted way to get with only a few clicks a complete dresspack for several robot manufacturers and types.&nbsp;

El diseñador de rodamientos iglidur® le permite mostrar los precios de los rodamientos lisos en sus dimensiones individuales y el material preferido en solo unos pocos pasos. Al final, recibirá un dibujo técnico de su rodamiento plano individual si lo desea y puede solicitarlo de inmediato o solicitarnos más información.&nbsp;

Ingrese los parámetros de la aplicación y obtenga anillos de dirección adecuados y la vida útil esperada con solo unos pocos clics.

Procesamiento personalizado de extremo mecanizado sin software CAD, dibujo 2D y archivo escalonado 3D, generado en línea, cálculo inmediato de precios, haga su pedido en línea de inmediato o solicite presupuesto&nbsp;&nbsp;

¿No está seguro de si encaja? Simplemente configure en línea con nuestro configurador de rodamientos de rodillos

With the help of the inner separation configurator you can create a layout of the needed cables in the e-chain and get a feeling if there is enough space for every cable and where is the best position inside the e-chain.&nbsp;

Aquí, los cables individuales en longitudes de 1,000m se pueden pedir al precio diario actual en 3 minutos.

Encuentre la junta de acoplamiento adecuada para
su solicitud: simplemente ingrese sus requisitos y reciba sugerencias adecuadas
.

Seleccione y solicite una solución personalizada entre más de 950 cables y 3.500 conectores enchufables.

Tenemos una amplia gama de opciones de fabricación disponibles para la producción de piezas de dibujo. Estaremos encantados de asesorarle sobre el método más eficiente técnica y económicamente y el material plástico perfecto.&nbsp;

¿No puedes encontrar el tamaño correcto? ¡Simplemente configure aquí!

Con solo unos pocos clics, puede armar un eje lineal completo que incluye motor, cables de conexión y piezas incorporadas.

Encuentre y solicite rápidamente cables de accionamiento enganados de acuerdo con los estándares del fabricante.

Ahorre tiempo y dinero con programas de muestra gratuitos para su sistema de control de motor

Pruebe nuestro sistema de control de motores en línea con la aplicación de navegador gratuita.


Food compliant according to FDA and EU Regulation 10/2011
Temperature-resistant up to + 180 °C
Suitable for autoclave


Food-safe high-temperature filament, FDA-compliant
iglidur A350 is an abrasion-resistant, high-temperature filament developed for the food and packaging industry. As such, the raw material is compliant with EU 10/2011 and FDA food contact regulations and has the industry standard blue colour. It is temperature-resistant up to 180 °C, fire-retardant according to UL94-V0 and can be sterilised with superheated steam.
Tip: iglidur A350 complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors

When to use it?

For applications in the food industry with high application temperatures of up to 180 °C

When not to use it?

When high wear resistance at high temperature loads is required
If, in addition to high application temperatures, high strength is also required or complex parts are to be produced (→ iglidur RW370)




Versatile use: good combination of high wear resistance, strength and temperature resistance


Self-lubricating filament iglidur i180 
Components made from the 3D printing material iglidur i180 can be used universally for all types of wear parts, such as plain bearings, gears and drive nuts, as this material has also been specifically developed for moving applications. The higher wear resistance and higher temperature resistance (100°C over the long term) extend the range of application, especially for more dynamic applications with higher surface speeds.

When to use it?

When an increased permanent application temperature of up to 100°C is required
For highly dynamic plain bearing applications


When not to use it?

If the application temperature is higher than 100°C in the long-term, or even higher wear resistance is required (→ iglidur J260)



attributes_iglidur_hlw_material_description

attributes_iglidur_i8_3d_druck_material_description

iglidur® A160 | FDA and EU regulation-compliant for chemicals and food
iglidur® A160 is characterised by extreme media resistance at low costs. Tribologically optimised, the material can be used up to +90°C and also meets the conformity requirements of the food processing sector. The property profile is rounded off by the &#34;optical detectability&#34; often desired in the industry, i.e. the blue colour.

Typical application areas

Beverage industry
Food industry
Medical technology


When to use it?

When a material with maximum media resistance is required
When a cost-effective material with high media resistance is required
When a material conforming to the 10/2011 EC is required

When not to use it?

When a universal material is needed for the food industry
If a very media-resistant material is sought for applications at more than +90°C
When a low-cost material with high wear resistance in dry operation is required




Flame-retardant, according to UL94-V0 and DIN EN 45545
Temperature-resistant up to + 170 °C
Flexural strength 91 MPa


Fire-retardant high-temperature filament, ideal for the railway industry
iglidur RW370 is an abrasion-resistant, high-temperature tribofilament which was specifically developed for use in railway vehicles. As such, its fire-retardant specifications conform to UL94-V0 and EN45545. In addition, it has the maximum mechanical strength of all tribofilaments and a long-term temperature resistance of 170 °C, which makes it the material of choice for high-temperature applications.

When to use it?

When the application requires high temperature resistance
When the mechanical strength of the other tribofilaments is not sufficient
When fire-retardant specifications are required

When not to use it?

When very high wear resistance at high-temperature load is required (→ iglidur A350)




Extremely robust and rigid with carbon fibre reinforcement
Suitable for structural components and multi-material components
Flexural strength up to 237 MPa, flexural modulus of elasticity of up to 11.5 GPa, improved strength in z-direction


High-strength filament for structural components or as a material partner for multi-material components
igumid P190 is an extremely strong and stiff 3D printed filament due to the reinforcement with carbon fibre. It was specially developed as a partner material for iglidur i190 for the production of very strong and at the same time friction-optimised components in multi-material printing. Furthermore, it can be used for printing stable structural components. Thanks to the high strength and high rigidity, as well as its low density of 1.25g/cm³, igumid P190 is ideal for lightweight construction with low material requirements.

When to use it?

For structural components where high strength and stiffness are required
For special mounting brackets for energy chains
As a multi-material partner with iglidur i190, for the combination of a high-strength material (igumid P190) and a particularly durable plastic (iglidur i190)

When not to use it?
For friction and wear applications (→ iglidur i150 or iglidur i180 or iglidur i190)
If the application requires a food-grade material (→ iglidur i150 or iglidur i151 or iglidur A350)
If the application temperature is higher than 120 °C in the long term (→ iglidur A350 or iglidur RW370)



iglidur® D | Low-cost material with silicone
In the development of iglidur® D, a very low price was at the top of the requirement profile. In particular, low coefficient of friction was required at high speeds in dry operation. This material containing silicone achieves low coefficient of friction in dry operation and runs with virtually no stick-slip.

Typical applications

Model building
Furniture/Industrial design
Fitness and sports


When to use it?

When low coefficient of friction is required
For high speeds
For low load
When looking for a very cost-effective material

When not to use it?

When high pressure loads occur
When silicone-free parts are required
When temperatures continuously greater than +90°C are present



The tribological properties such as friction and wear of iglidur® J UV are comparable to those of the very wear-resistant standard material iglidur® J. A special feature of J UV, however, is that the material was developed for use in permanent UV radiation. 


attributes_iglidur_tx1_material_description

iglidur® B | High elasticity and low-noise
The compressive strength of the iglidur® B is low however this is an important property of this material. It is mainly used where vibration dampening and acoustic separation are required. When to use it?

When maximum vibration dampening is required
When sealing function has to be integrated
When high edge loads occur


When not to use it?

In high humidity applications
When a cost-effective universal material is required
When high wear resistance is required 



With DIN EN 45545, the new iglidur RW250 material fulfills the strict fire protection requirements of railroad technology. In addition, the material formulation has been optimized for absolute wear resistance and offers very good running properties in many applications.  


attributes_igutex_tx1_material_description

iglidur® F | Electrically conductive, highly pressure-resistant
Highest stiffness and hardness, in addition particularly conductive: when it comes to the electrical conductivity of materials, i.e. especially in applications where electrostatic charging must not occur, iglidur® F is the right choice. The iglidur® F is extremely pressure-resistant. At room temperature, they could be statically loaded up to 105MPa.

Typical applications

Automotive
Textile industry


When to use it?

When the material should be electrically conductive
For high static loads

When not to use it?

When mechanical reworking of the material is required
When extreme wear resistance is required
When very low coefficient of friction in dry operation is required
For use under water
When a universal material is sought



iglidur M260 was specially developed for use in harsh environments. In addition, care was taken during development to be able to use the material particularly well for injection-molded thick-walled bearings. This makes iglidur M260 particularly suitable for applications in which thick-walled bushings are to be used or replaced that are also as robust as possible.



iglidur® X6 | Service life up to six times longer than iglidur® X
Thanks to nano technology, iglidur® X6 has a service life up to six times longer than the high-performance material iglidur® X in many swivel and rotation applications - even beyond +100 °C.

Typical application areas

Fluid technology
Glass industry
Food industry
Mechanical engineering
Textile industry 


When do I use it?

When temperatures greater than +150 °C occur
If the wear resistance of iglidur® X is not sufficient during swiveling and rotation
If the press fit is to be improved compared to iglidur® X
If the highest media resistance is required
When freedom from PTFE is required

When do I not use it?

When a cost-effective universal bearing is sought
When a bearing for underwater use is sought
If you are looking for a wear-resistant high-temperature bearing for linear strokes 



iglidur® AB | The first antibacterial iglidur® material
iglidur® AB helps to reduce the level of bacterial contamination in bearing points that are difficult to access. iglidur® AB was specifically developed for applications in areas with high hygiene requirements. Often such applications are manually operated pivots (doors, medical furniture, etc.). The material reduces the level of bacterial contamination but - like all &#34;anti-bacterial&#34; materials - is not a substitute for adequate hygienic measures.

Typical application areas

Medical technology
Laboratory technology
Ventilation systems
Sanitary furniture and equipment
Bearings of patient and care furniture


When to use it?

When bearing points must meet high hygienic standards
When a universal material for manual applications is required
When a material for low to medium loads is required

When not to use it?

When a highly wear-resistant material is required for continuous dry operation
When a material complies with the EU regulation 10/2011 EC and/or the FDA requirements for repeated food contact is sought
When a material with the highest universal media resistance is required



The materials of the ECON series, iglidur J4, GLW, P4, PLW210, ALW350, HLW and NEW: Q2LW are not only ideally suited for many applications, but are now also available on the European market in standard dimensions.  
Advantages: 

Universally applicable
Variants for high temperatures
food use and wear resistance available
Cost-effective, especially for larger quantities
Approx. 50 % reduction in CO2 footprint 



iglidur® P210 | Specialist for swivels, roller applications and more - Good friction and wear values on almost any shaft
With iglidur® P210, the user has a versatile all-rounder material at his disposal, which has an above-average service life, especially in swivel applications with medium loads of up to 20 MPa. The versatile material has already proven itself in numerous customer-specific solutions and as a semi-finished product material. Clip-on or pre-stressed designs and use in vehicle interiors are possible.

Typical areas of application

Agricultural engineering
Mechanical engineering
Furniture / industrial design
Textile industry


When do I use it?

If you are looking for a universal material for use in damp environments
When a very wear-resistant material is required for swivel applications in the medium load range
When edge loads and impacts occur
If the surface pressure of iglidur® J is not sufficient

When do I not use it?

When a universal material with the greatest possible variety of dimensions is sought
If a material is required for very highly loaded swivel applications
When temperatures greater than +100 °C occur



iglidur® A181 | The universal material for food contact
The material iglidur® A181 offers both FDA and 10/2011 EC compliance. The blue colour also facilitates the &#34;optical detectability&#34; often desired in the food sector. Compared to iglidur® A180 with regard to the mechanical properties, temperature and media resistance, iglidur® A181 is more suitable with respect to the wear resistance in most cases.

Typical applications

Beverage industry
Food industry
Medical technology


When to use it?

When FDA compliance is required
When a material conforming to the 10/2011 EC is required
When an universal material suitable for direct contact with food is required

When not to use it?

When FDA and 10/2011 EC regulation compliance are not required
When continuous operating temperatures are higher than +90°C
When a cost-effective universal material is sought



iglidur® A200 | FDA-compliant for low speeds
iglidur® A200 is suitable for use in direct contact with food. It is the ideal solution for bearing points on machines for the food industry, medical equipment manufacturing, small household appliances, etc. Since the addition of solid lubricants had to be dispensed with to ensure food compatibility, iglidur® A200 is specially designed for abrasion resistance. Additionally, the iglidur® A200 is characterised by its ability to embed dirt and by its quiet operation.

Typical applications

Food industry


When to use it?

Suitable for contact with food
When a low noise level is required
When dirt needs to become embedded
When FDA compliance is required

When not to use it?

When the maximum wear resistance is necessary
When temperatures greater than +80°C occur in the long term
When a cost-effective universal material is sought
For operations in wet environments



attributes_iglidur_a290_material_description

iglidur A250 | Wear-resistant deflection in the food industry 
iglidur A250 is developed for use in the food and packaging industry and designed for all loads occurring there. Even high loads are no problem and the material functions reliably without additional lubrication. It is wear-resistant, is characterized by good media resistance and is detectable. 
Typical areas of application

Beverage industry 
Food industry 
Medical technology

When do I use it? 

When lubricant-free deflection of belts is required When FDA conformity is required 
When the deflection needs to be tight and precise 
When wear resistance and FDA compliance are important under high loads 
When a cost-effective and easy-to-install solution is required 
When the bearing is used in an acidic environment 

When should I not use it? 

When high belt speeds need to be realized 
When very high belt tensioning forces apply 
When a fixed knife edge is required 



iglidur® H | High temperature and chemical resistance
iglidur® H is a fibre-reinforced thermoplastic material that was specially developed for applications in high humidity or under water. iglidur® H can be used completely free of lubrication; in wet applications, the surrounding media acts as additional lubricant. Suitable for temperatures up to +200°C. Very low coefficient of friction when used with hardened shafts.

Typical applications

Beverage industry
Medical technology
Offshore
Shipbuilding


When to use it?

﻿For underwater applications
When high temperature resistance is required
For high mechanical loading
For applications in contact with chemicals

When not to use it?

When extremely high wear resistance under water is required
When the best universal resistance to chemicals is required
For maximum compressive strength at higher temperatures



iglidur® A500 | The endurance runner at higher temperatures in the food sector
iglidur® A500 is approved for direct contact with food. It has an exceptionally good chemical resistance and is ideal for the most difficult applications of machines for the food industry. Although iglidur® A500 is a very soft material, it also has an excellent compressive strength, even at high temperatures.

Typical applications

Beverage industry
Food industry
Medical technology


When to use it?

When FDA compliance is required
When a high chemical resistance is required
When good abrasion resistance is required
Temperature-resistant from -100°C to +250°C

When not to use it?

When extreme wear resistance is required
When high temperature and chemical resistance is not required
When a cost-effective universal material is sought



iglidur® M250 | The robust all-rounder with outstanding vibration damping
The self-lubricating material iglidur® M250 is particularly characterized by impact strength, vibration damping and wear resistance. It proves itself particularly well under stresses where a vibration-damping function of the material is required, e.g. in sports equipment and packaging machines. As it is also capable of embedding dirt, it is also suitable for agricultural machinery and gardening equipment.

Typical areas of application

agricultural engineering
Mechanical engineering
Furniture / industrial design
Textile industry


When do I use it?

When the material is exposed to heavy soiling
For excellent vibration damping
At low to medium speeds
When mechanical reworking is required
Insensitive to edge pressure
High impact strength
Thick wall thicknesses according to DIN 1850

When should I not use it?

For applications in wet areas
When very high precision is required
For very smooth shafts
When a cost-effective material with maximum wear resistance is required



Iglidur® Q290 | medium to high loads, especially on soft shafts
iglidur® Q290 shows excellent service life in robust swivel applications, such as those frequently encountered in agricultural machinery, especially on “soft” shafts (e.g. galvanized). The stress on the shafts is also minimal.

Typical areas of application

Agricultural technology
Construction machinery


When do I use it?

When a durable material is required for robust
operating conditions (agriculture, construction machinery, ...)
with medium to high dynamic loads
on “soft” shafts is required

When should I not use it?

If permanent static loads greater than 55 MPa occur
If a very wear-resistant material is required on “soft” shafts
is required for low loads
If temperatures greater than +140 °C occur permanently 



iglidur® F2 | ESD-suitable, wear-resistant and dissipative
iglidur® F2 helps to avoid electrostatic charging. Good media and temperature resistance, suitable even in wet conditions due to low moisture absorption and good universal wear values in a wide range of applications.

Typical applications

Machine tools
Robotics


When to use it?

When the material should be electrically discharging
When an universal material is required

When not to use it?

When an universal material without static dissipation capability is required
For underwater use
When extreme wear resistance is required



attributes_iglidur_m210_material_description

iglidur® G1 | The new lubrication-free standard
With iglidur® G1 we offer a wear-resistant and versatile material for a wide range of applications. Recommended for applications with medium to high loads at medium speeds. Even at elevated temperatures up to 180°C, iglidur® G1 is dimensionally stable, wear-resistant and offers very low moisture absorption. iglidur® G1 is suitable for a multitude of different applications and represents an all-rounder with very good running performance.

Typical applications

Automotive
Machine tools
Furniture/Industrial design
Fitness and sports


When to use it?

When an economical all-round performance material is required
For low to average surface speeds
When the material needs to run on different shaft materials
For pivoting and rotational movements

When not to use it?

When mechanical rework is required
When the highest wear resistance is required
When universal chemical resistance is required
When temperatures are continuously greater than +180°C
When used under water



iglidur® J2 | Environmentally friendly, versatile and cost-effective
iglidur® J2 has a good universal media resistance comparable to iglidur® J and similar materials. The mechanical specifications in sporadically moving applications are better, but in comparison there are significant reductions in friction and wear. Like all iglidur® materials, iglidur® J2 is PFOA-free.

Typical applications

Model building
Robotics


When to use it?

When low moisture absorption and good media resistance is required for static load
When a cost-effective plain bearing is required for use in a wet environment with low pv values
When there is basic lubrication of the bearing

When not to use it?

When a highly wear-resistant bearing is required for continuous dry operation
When low moisture absorption and media resistance play a minor role
When resistance to high temperatures and chemicals is required



iglidur® J3 | The new endurance runner: specialist for pivoting loads
iglidur® J3 is a material with improved wear resistance at low to medium loads and high speeds. The service life is up to 300% higher than that of iglidur® J, the proven top endurance runner material.

Typical application areas

Vending machinery
Printing industry
Beverage industry
Glass industry
Aviation


When to use it?

When optimising wear resistance compared to iglidur® J
When very low coefficients of friction in dry operation are required
When high wear resistance at low loads is required
When low moisture absorption is fundamental
When good liquid media resistance is required

When not to use it?

When a wear-resistant material is required for linear strokes
When continuous operating temperatures are higher than +90°C 
When radial surface pressure is higher than 45MPa



attributes_iglidur_l350_material_description

iglidur® L250 | For high speeds
iglidur® L250 is a material especially for high speeds, fast sliding movements and low coefficients of friction. The material can exploit these advantages especially at low loads. Applications in which these advantages play a role are fans, small motors, fast-running sensors or magnet technology.

Typical areas of application

Automotive


When do I use it?

For high-speed rotation applications
When maximum service life is required
For low loads
When low-noise running is required
For very low coefficients of friction

When not to use it?

When high pressure loads occur
When temperatures are permanently higher than +90 °C
When low moisture absorption is required



attributes_iglidur_l100_material_description

iglidur® W360 | Endurance runner with all-round profile
The iglidur® material W360 combines excellent endurance properties with high temperature resistance, reduced moisture absorption and good price/performance ratio - a genuine all-rounder in the endurance sector.Typical applications

Vending machinery
Automotive
Motor bikes &amp; ScootersWhen to use it?
When an extremely wear-resistant material is required for medium loads
When regular contact with moisture occurs
When continuous operating temperatures are higher than +90°C


When not to use it?

When a wear-resistant material is sought for the standard temperature range and low to medium loads
When maximum temperature resistance and high wear resistance is required
When the highest wear resistance under water is required 



attributes_igutex_tx3_material_description

attributes_iglidur_p4_material_description

The special feature of iglidur AX500 is that it is a conductive material. In addition, AX500 has an even lower wear value than its predecessor. The material was developed especially for the food industry and can therefore be used in contact with food without any problems.


iglidur® H370 | Highest service life under water and high media resistance
For applications under water, iglidur® H370 is the right solution. The material absorbs extremely high loads, is resistant to chemicals and can be used at temperatures up to +200°C.

Typical applications

Fluid technology
Offshore
Shipbuilding
Heavy machinery / Plant construction
Packaging industry


When to use it?

For use under water
When high temperature resistance is required
When high mechanical loading and wear resistance is required
When good chemical resistance is required

When not to use it?

When mechanical reworking of the wall surface is required
When high wear resistance in temperatures is required
For use in heavy dirt
When a low-cost, high-volume solution is needed



iglidur® Q | For high loads - wear-resistant on many shafts
iglidur® Q was developed especially for extreme loads. Under high loads, iglidur® Q is one of the iglidur® materials with by far the best wear resistance. From a radial load of 25 MPa, even the highly abrasion-resistant iglidur® W300 is surpassed. Special solid lubricants distributed extremely finely in the material ensure that maintenance-free dry running is guaranteed under any load.

Typical areas of application

Agricultural technology
Construction machinery
Traffic engineering


When do I use it?

For swivel applications
For very good abrasion resistance, especially under extreme loads
For extreme p x v values
If the material should be insensitive to dirt

When should I not use it?

For use under water
When temperatures are permanently higher than +135 °C
If high edge loads or heavy impact loads occur



attributes_igutex_tx2_material_description

 iglidur® H3 | Tough, wear-resistant, durable
With iglidur® H3 there is a new material in the iglidur H family. H3 sets new standards with its high durability. This material is tougher than comparable materials and achieves a longer service life than iglidur H1. iglidur H3 was developed primarily for use in pumps and demanding media and shines with its low moisture absorption. 
 


iglidur® Z | Longest service life under extreme conditions - Wear-resistant &amp; impact-resistant even under high loads and temperatures
Highest compressive strength, coupled with high elasticity, gives iglidur® Z its outstanding properties in connection with soft shafts, edge loads and impacts. At the same time, the bearings are suitable for temperatures up to +250 °C.

Typical areas of application

Construction machinery
Glass industry
aerospace industry
Mechanical engineering
Textile industry


When do I use it?

At temperatures up to +250 °C, continuous; or +310 °C, short-term
When high wear resistance is required, especially under high radial loads
For high sliding speeds
For edge pressure in conjunction with higher surface pressures

When should I not use it?

For low loads and temperatures
When an inexpensive all-round material is required
When an electrically conductive material is needed



iglidur® J | The versatile endurance runner
iglidur® J is characterised by the lowest coefficients of friction in dry operation and its very low stick-slip tendency. With a maximum recommended surface pressure of 35MPa, iglidur® J is not suitable for extreme loads.

Typical applications

Vending machinery
Printing industry
Beverage industry
Aviation
Cleanroom


When to use it?

For high speeds
When highest wear resistance at low to medium pressures is required
Low wear against different shafts
When a low coefficient of friction in dry operation is requested
For vibration dampening
When good chemical resistance is required
For best performance with soft shaft materials
Low moisture absorption

When not to use it?

When high pressure loads occur
When temperatures of greater than +120°C occur in the short term
When a cost-effective bearing for occasional movements is sought



iglidur® R | Low-cost material, low coefficients of friction
In the development of iglidur® R, the focus was on high performance and a very low price. In particular, low friction and wear values were to be achieved in dry running. Components made of iglidur® R are specifically supported by a combination of solid lubricants. The PTFE and silicone-free material achieves outstandingly low friction values in dry running and runs largely stick-slip-free.


Typical areas of application

Motorcycle/Rolloler
Furniture/industrial design
Sport, fitness &amp; rehab



When do I use it?

When high wear resistance at low loads is required
When a very inexpensive material is required
When very low coefficients of friction are required in dry running
When edge loads occur
When low moisture absorption is desired
When PTFE or silicone are not approved for the application

When should I not use it?

When high pressure loads occur
When temperatures are permanently higher than +90 °C
When the best possible wear resistance is required 



iglidur® H4 | The automotive standard for temperatures up to +200°C
iglidur® H4 stands for high load capacity, good abrasion resistance and good temperature resistance, when economic aspects are also to be considered. Temperatures up to +200°C, permitted surface pressure up to 65MPa, and excellent chemical resistance are only some of the essential attributes. Solid lubricants reduce the coefficient of friction and support the wear resistance, which has been significantly improved compared to iglidur® H2 , which are also very cost-effective.

Typical applications

Vending machinery
Automotive
Packaging industry


When to use it?

For application with fuels, oils, etc.
When high wear resistance is required
For ﻿low coefficient of friction
For high temperature resistance from -40°C to +200°C
For high chemical resistance

When not to use it?

For underwater use
When a cost-effective universal material is sought
When a temperature and media-resistant material for static applications is required



iglidur® H2 | Low cost, for high temperaturesWhen using iglidur® H2, economic aspects are in the focus. It is the first time that it is possible to offer such a high-performance material for high volume applications with these technical advantages at such a cost-effective price: temperatures up to +200°C, permitted surface pressure up to 110N/mm², and excellent chemical resistance. The iglidur® H2 material is self-lubricating and suitable for all motions.Typical applications

Automotive 


When to use it?

For use under water
When a cost-effective material is required for use at high temperatures
For applications with fuels, oils, etc.
Resistant to chemicals


When not to use it?

When extreme wear resistance is required
When vibration dampening is required
When neither increased temperatures nor media contact occur 



iglidur® HSD350 | Media-resistant and hygienic at low costs
The new material enables continuous use where hygiene is important, including regular sterilisation, with an outstanding price/performance ratio.

Typical application areas

Fluid technology
Medical technology


When to use it?

When the bearing point is regularly sterilised using hot steam
When a low-cost material is needed at the same time
When good chemical resistance is required
Low moisture absorption

When not to use it?

When high pressure loads occur
When short-term temperatures higher than +120°C occur
When a cost-effective material for occasional movements is necessary



iglidur® C500 | High media and temperature resistance, up to +250°C, wear-resistant
iglidur® C500 can be used in applications up to +250°C and is extremely media-resistant (such as in cleaning processes with hydrogen peroxide), wear-resistant and has low coefficients of friction. Also suitable for various special designs. The colour shows the use under extreme environmental influences.

Typical applications

Automotive
Glass industry
Food industry
Machine tools
Heavy machinery / Plant construction


When to use it?

When an extremely media-resistant material with high flexibility is required
When you need a highly wear-resistant and media-resistant material

When not to use it?

When an FDA-compliant high temperature material is required
When you need a media-resistant, high-temperature material with the largest possible range of dimensions



iglidur® C | Free from PTFE and silicone, good abrasion resistance
iglidur® C was developed especially for applications where the use of PTFE and silicone is not possible. Such applications can be found in the electronics, tobacco and beverages industries, as well as many painting processes. Keywords like paint compatibility and silicone-free make it useful to study this material more closely. 

Dry operation
Good abrasion resistance
Lubrication- and maintenance-free


When to use it?

When PTFE and silicone are not allowed in the application
For applications with low speed
If dirt-resistant materials are required
If maintenance-free, self-lubricating materials are needed


When not to use it?

When highest wear resistance is needed
When lowest coefficients of friction are required
If a cost-effective option is requested
When low moisture absorption is required 



attributes_iglidur_q3e_material_description

attributes_iglidur_eco_g_material_description

iglidur® V400 | For soft shafts, up to +200°C
Highly wear-resistant material for soft shafts and temperatures up to +200°C with low moisture absorption and very good chemical resistance.
Typical applications

Ventind machinery
Automotive
Aviation
Heavy machinery/Plant construction


 When to use it?

When extreme wear resistance is required with soft shafts
When the highest wear resistance at temperatures above +100 °C is required
When vibrations and edge loads are present
When the material should be resistant to chemicals


When not to use it?

For hardened shafts
When room temperatures prevail
When a cost-effective universal material is sought 



iglidur® G | The all-rounder
The widest range of different requirements is covered by iglidur® G. Therefore, the material is rightly called universal. Typical applications include medium to high loads, medium surface speeds and medium temperatures. iglidur® G is the decathlete among iglidur® materials. It performs very well in all technical disciplines and is the classic all-rounder, primarily with respect to the overall general, mechanical, thermal and tribological specifications.

Typical areas of application

Agriculture
Automotive
Construction machinery
Machine tools
Fitness and sports


When to use it?

When an economical all-round performance material is required
For low to average surface speeds
When the material needs to run on different shaft materials
For pivoting and rotational movements

When not to use it?

When mechanical rework is required
When the highest wear resistance is required
When universal chemical resistance is required
When temperatures are continuously greater than +130°C
When used under water



iglidur® Q2 | The durable heavy-duty material
iglidur® Q2 stands for high load-bearing capacity and good abrasion resistance under high loads. The price-performance ratio is outstanding. Solid lubricants reduce the coefficient of friction and support the wear resistance, which has been significantly improved compared to other iglidur® materials, especially for highly loaded swivel applications.

Typical areas of application

Agricultural technology
Construction machinery
Mechanical engineering


When do I use it?

When high dynamic loads occur
If, in addition to high loads, shocks, impacts and dirt occur
For highly loaded swivel applications

When do I not use it?

If only static loads occur
When high pv values occur at high speeds
If an inexpensive all-rounder material is required
When soft shafts are used



iglidur® K | Versatile and cost-effective for medium temperatures
iglidur® K is the cost-effective universal material for medium temperatures and applications under various environmental influences such as moisture and media.

Typical areas of application

Printing industry
Plastics machinery
Medical technology
Packaging industry


When do I use it?

When a cost-effective all-rounder material is required
When it is used in a damp environment
When good wear resistance up to medium loads is required

When do I not use it?

When maximum wear resistance is required
When maximum media resistance is required
When a high-temperature material is required



The ECO group includes iglidur materials that are made from at least 97% regranulate. Due to the production from already processed raw materials, they are particularly sustainable.
iglidur® ECO H - For highly corrosive and hot environments

Suitable for extremely high speeds
Very low moisture absorption
Good wear resistance under water
Very high media resistance
Resistant to high loads (&gt;60 N/mm²)  



iglidur® J200 | Specifically for aluminium shafts
iglidur® J200 is the result of the development of particularly low-friction materials. When using it in linear motion, friction can be critical. Many materials can give low coefficients of friction under high loads, but this material can give excellent coefficients of friction even at low loads.

Typical applications

Vending machinery


When to use it?

For applications with anodised shafts
When lowest coefficient of friction is required
When long service life at low loads is required

When not to use it?

When steel shafts are provided
When continuous operating temperatures are higher than +90°C
When a cost-effective universal material is sought



iglidur® J350 | Endurance runner with high dimensional stability at temperature - applicable with many shafts and load collectives
A superior material for rotational applications - and that on many different steel shafts: The service life of iglidur® J350  can often be multiplied at loads between 2MPa and 50MPa. In addition, the high temperature resistance makes it a very versatile material.

Typical applications

Vending machinery
Automotive
Glass industry
Machine tools


When to use it?

When a wear-resistant material for rotational movement at medium and high loads is required
When a cost-effective material is required for use at high temperatures
When press-fit up to +150°C is necessary
When high wear resistance is required at high loads
When the material is exposed to shock loading

When not to use it?

When continuous operating temperatures are higher than +180°C
When the lowest friction is required
When a cost-effective, low-friction mterial is sought
At high peripheral speeds



iglidur® GLW | Low-cost material for large volumes
With iglidur® GLW we can offer our customers an alternative to iglidur® G for large series applications. Featuring similar mechanical properties as iglidur® G, iglidur® GLW is primarily recommended for static loads. These applications, where the properties of iglidur® G are unimportant to a degree , iglidur® GLW presents a cost-effective alternative.

Typical applications

Automotive
Machine tools
Robotics


When to use it?

When an economical universal material for high volumes is required
For high, primarily static loads
For low to medium speeds

When not to use it?

When mechanical reworking of the wall surface is required
For primarily dynamic loads
When extreme wear resistance is required
For use under water



 iglidur® J260 | Ideal for plastic shafts 
The material iglidur® J260 proves itself again and again where the highest service life and coefficients of friction are required - especially in connection with plastic shafts! iglidur® J260 is similar to iglidur® J, an endurance runner with excellent wear properies, whereby the upper long-term application temperature of +120°C offers more reserves. 
  
Typical applications  

Vending machinery 
Machine tools 
Robotics 

  
When to use it? 

When polymer shafts are used 
When the temperature rating of iglidur® J is notsufficient 
When a material with low coefficient of friction isrequired 
When high wear resistance is required at medium loads 
When good liquid media resistance is required 

When not to use it? 

When high surface pressures occur
When continuous operating temperatures are higher than+120°C
When universal wear resistance is required 



The proven long-life material iglidur® J3 is now also available in black. The endurance runner has been specially developed for swivels and swelling loads and is also resistant to media.


iglidur® N54 | The biopolymer, based on renewable raw materials
iglidur® N54 is the first iglidur® material that is largely based on biopolymers. In addition to the fact that all iglidur® materials are already lubricant-free, this is a further step towards a positive environmental balance. Good coefficients of friction paired with service lives that allow series use in sporadically moving applications give this material a firm place in the iglidur® program.

Typical areas of application

Mechanical engineering
Furniture / industrial design


When do I use it?

For sporadically moving applications with low to medium loads
For quasi-static loads
When the environmental balance of a product needs to be optimized

When do I not use it?

When a universal standard material is required
When there is a high frequency of movement and continuous operation
When elevated temperatures are present



iglidur® W300 | The endurance classic, very wear-resistant on (almost) all shafts
iglidur® W300 offers high wear resistance, even in rough shafts or very abrasive ambient media. This material is the most tolerant of these external effects out of all the iglidur® range.

Typical applications

Vending machinery
Printing industry
Wood industry
Machine tools


 When to use it?

When especially high service life is necessary
When low coefficient of dynamic friction and high wear resistance are required
For use on 304 stainless steel shafts
For harsh environments and rough shafts
Dirt-resistant


When not to use it?

For high loads from 50 MPa
When temperatures continuously greater than +90 °C are present
For very wet environments
When an exceptionally economical material is desired 



attributes_iglidur_k230_material_description

iglidur® P | The favorable outdoor all-rounder - No swelling even with high ambient humidity
Due to its thermal stability and low water absorption, iglidur® P is one of the most dimensionally stable all-rounder materials for changing ambient conditions. iglidur® P is recommended for swivel and rotational movements with medium loads.

Typical areas of application

Mechanical engineering
Furniture / industrial design
Solar technology
Sports, fitness &amp; rehab
Traffic engineering


When do I use it?

When low moisture absorption is required
When a cost-effective material for high pressure loads is required
When higher precision is required in damp and medium temperatures

When do I not use it?

When mechanical reworking is required
When maximum wear resistance is required



attributes_iglidur_uw160_material_description

The ECO group includes iglidur materials that are made from at least 97% regranulate. Due to the production from already processed raw materials, they are particularly sustainable.
iglidur® ECO P - universally applicable in high humidity outdoors

Very good coefficients of friction
Low moisture absorption
Resistant to edge pressure
Resistant to shocks and impacts
Resistant to dirt and dust  



iglidur® T220 | For the tobacco industry, FDA-compliant
iglidur® T220 is a special material for use in the tobacco processing industry. It fulfills the requirements of the tobacco industry (engineering database). The material is free of undesirable or prohibited ingredients, as required by renowned manufacturers of tobacco products as of 2004, and contains no carcinogenic additives such as PTFE.

Typical areas of application

Tobacco processing industry


When do I use it?

If the material needs to be free from ingredients that are undesirable or prohibited in the tobacco industry
When FDA conformity is required

When not to use it?

When high surface pressures occur
When an inexpensive all-round material is required
When maximum wear resistance at low pressure loads is required
If only freedom from PTFE and silicone is required 



iglidur® A180 | The FDA-compliant all-rounder
iglidur® A180 is suitable for use in direct contact with food. It is therefore the ideal solution for bearing points on machines for the food and packaging industry, medical equipment manufacturing and small household appliances, etc. Even where wet cleaning or process-related contact with moist media is the order of the day, iglidur® A180 is characterised by minimal moisture absorption.

Typical application areas

Beverage industry
Food industry
Medical technology


When to use it?

When the material has direct contact with food
When FDA compliance is required
When a low noise level is required
When low moisture absorption is fundamental

When not to use it?

When only the highest wear resistance is required
When temperatures permanently higher than +80°C occur
When an inexpensive universal bearing is sought



attributes_iglidur_ecop210_material_description

iglidur® G V0 | V0 rating according to UL94, universal
iglidur® GV0 is the first iglidur® material with V0 rating according to UL94 for universal use in the normal temperature range. It is predestined for applications with high fire protection requirements (vehicle interior, aviation, building services, etc.). All other iglidur® materials with V0 rating are part of the high-temperature segment. The general mechanical and thermal specifications are largely comparable with the all-rounder iglidur® G.

Typical application areas

Passenger seats
Elevators
Escalators
Switch cabinets
Hinges


When to use it?

When a UL94 V0 classified material for normal environmental conditions is required
When an economic UL94 V0 classified material is required

When not to use it?

When a UL94 V0 classified material for high-temperature applications is required
If a standard material is required without compliance with special fire standards
Use our filter options to find the suitable product



attributes_iglidur_uw_material_description

Specially developed for the food sector, iglidur® A230 is particularly suitable for machines and systems with food contact due to its optically easily detectable color, low moisture absorption and conformity according to FDA and EU10/2011 directive. 




Flexural strength up to 80 MPa, best iglidur filament
Excellent service life - 50 times higher abrasion resistance than ABS


Flexible and wear-resistant filament - iglidur i190
iglidur i190 is characterised by high wear resistance, as the material is enriched with solid lubricants. It can be processed on regular 3D printers, but a closed 3D printer is recommended. Due to its high wear resistance and excellent mechanical specifications (strength, toughness, coating adhesion), it is an all-round material that is suitable for most applications and 3D printers. Of all igus tribofilaments, only iglidur RW370 has a higher strength than iglidur i190. It can also withstand a long-term application temperature of up to 90 °C (after tempering the component).

When to use it?

For all types of applications where low friction and high wear resistance are important
When higher strengths are required

When not to use it?

If the application temperature is higher than 90 °C in the long term (→ iglidur J260 or iglidur RW370)
For applications under water or with high humidity (→ iglidur i180)
If the application requires a food grade material (→ iglidur i150 or iglidur A350)



The ECO group includes iglidur materials that are made from at least 97% regranulate. Due to the production from already processed raw materials, they are particularly sustainable.
iglidur® ECO A180 - particularly cost-effective 

Low moisture absorption
High media resistance
Resistant to edge pressure
Resistant to shocks and impacts
Resistant to dirt and dust  



Die Werkstoffe der ECON-Serie, iglidur J4, GLW, P4, PLW210, ALW350, HLW und NEU: Q2LW sind nicht nur für viele Anwendungsbereiche bestens geeignet, sondern nun auch im europäischen Markt in Standardabmessungen verfügbar.  
Vorteile: 

Universell einsetzbar
Varianten für hohe Temperaturen
Lebensmitteleinsatz und Verschleißfestigkeit verfügbar
Kostengünstig, besonders bei größeren Stückzahlen
Ca. 50 % reduzierter CO2-Fußabdruck  



drylin W miniature linear carriage WW | Made of stainless steel

Descripción del producto

Datos técnicos

Herramientas online

Descargas

Consultoría

Estaría encantado de responder a sus preguntas en persona

Consulta y entrega