YE.200 e-chain® series

[Design Study]
More inner height for extreme loads and maximum stability

Based on the successful YE-product range of igus® hybrid chains (best mix of plastic and steel) in a new size with an inner height of 200mm. Thanks to the new steel sleeve stop-dogs (instead of plastic), the e-chain® absorbs high forces and offers high stability.

Inquire about the YE 200 e-chain®

Tech up

Guide extreme loads with an inner height of 200mm

Cost down

Guide hydraulic hoses safely with reinforced stop-dogs

Proof

YE series successful in customer applications with high fill weighs

Sustainability

Have your e-chain® recycled at the end of its life cycle in the igus® chainge® recycling program

Order a free sample

Order a free sample of YE and see the quality of the product for yourself.

Order now

Order now

Realized in practice

Hybrid tube YRHD in use at DWK Drahtwerk Köln as a replacement for steel tube

High stability and considerable fill weight - both requirements of the DKW Drahtwerk Köln have led to the selection of the hybrid chain YRHD.108.25.500.0 (tube variant) for implementing the unsupported travel of 12.5m with a fill weight of 28kg/m. The lids and shelves of the energy tube can be opened so that it is possible to add or replace cables later.

Two YE.42 side-by-side hybrid chains replace a steel chain at Sinopec

The built-in hydraulic hoses of this power catwalk application using steel chains wear out very quickly, so an alternative was sought. As the YE.42 hybrid chain consists of steel side plates that ensure an unsupported length that is approx.100% longer (compared to plastic chains of the same size) and as the plastic links that have proven themselves for more than 35 years are used as crossbars, the YE series hybrid chain solves the customer's wear problem.