Full-suspension mountain bike

Pivot points play an important part in rear-suspension design
A leading manufacturer of full-suspension mountain bikes has developed one of its most innovative bikes to date. Triple-butted tubing gives added strength to the joints, while the carbon-fiber frame is lightweight, corrosion resistant, and strong.

On the two front pivot points, between the swing arm and the frame, deep-groove ball bearings are used, because the bearings have to execute a relatively large swiveling motion. At the rear joint, on the rear axle, an iglide® J plastic bushing from igus® has been implemented.

The plastic bushing has a much larger contact area than a roller bearing. This means that, even under extreme stress and lateral forces, it doesn’t wobble.

To explore our bicycle industry page, click here.

Specialist dealers and Olympic cyclists are fully satisfied
Dealers were extremely happy with the new solution because the feedback from bike owners turned out to be 100% positive. The torsional stiffness of the wheel is very good and the suspension responds very quickly.

Olympics winner Sabine Spitz won a gold medal in the Beijing Olympics in 2008 on a mountain-bike with iglide® plastic bushings in the suspension fork. The polymer components stood up to the constant impacts, edge loads, and dirt on the extreme course at the Chinese Laoshan Velodrome.

At the Athens Olympics in 2004 Olympics, mountain bikers who had ridden bikes with lightweight, wear-resistant iglide® bushings built into the guide rollers of the derailleurs, were awarded gold, silver, and bronze medals.